How To Measure For Curtain Rod

When it comes to hanging curtains, getting the right measurements is essential. Not only will it affect the overall look of your window treatments, but it can also impact the functionality of your curtains. If your curtain rod is too short, your curtains will bunch up and look messy. If it's too long, your curtains will hang too low and block out light. In this article, we'll show you how to measure for a curtain rod so that you can get the perfect fit every time.

1. Determine the type of curtain rod you want.

There are two main types of curtain rods: inside mount and outside mount. Inside mount curtain rods are mounted inside the window frame, while outside mount curtain rods are mounted on the wall outside the window frame. The type of curtain rod you choose will affect the way you measure for it.

2. Measure the width of the window.

To measure the width of the window, simply measure from one side of the window frame to the other. Be sure to include the molding or trim around the window.

3. Add 6-12 inches to the window width.

This will give you the length of the curtain rod. The extra 6-12 inches will allow your curtains to extend beyond the edges of the window, which will help to block out light and create a more finished look.

4. Determine the height of the curtain rod.

The height of the curtain rod will depend on the style of curtains you choose. For floor-length curtains, you'll want to mount the curtain rod 4-6 inches above the window frame. For curtains that fall just below the windowsill, you'll want to mount the curtain rod 2-4 inches above the window frame.

5. Mark the location of the curtain rod brackets.

Once you've determined the height of the curtain rod, you need to mark the location of the curtain rod brackets. The brackets should be spaced evenly apart, and they should be mounted at least 6 inches from the edge of the window.

6. Install the curtain rod brackets.

Once you've marked the location of the curtain rod brackets, you can install them. Be sure to use the appropriate hardware for the type of wall you have.

7. Hang the curtain rod.

Once the curtain rod brackets are installed, you can hang the curtain rod. Simply slide the curtain rod through the brackets and tighten the set screws.